Published at Sunday, June 24th, 2018 - 10:28:54 AM. Lamp. By Searlait Evonne.
Place the ladder below the old lamp but slightly to the side so you can comfortably and safely reach its base on the ceiling. The old lamp is held in place by a nut just below its base, using the wrench loosen it and gently stretch the electric wires above. There should be two wires connected to the lamp and sometimes, not always, a ground wire sticking from the side of the base. Remember the ground screw is green most lamps have one even if it is not connected.
Go to the electric panel and turn off the circuit breakers in the area where you will be working. If you do not know which circuit breaker cuts off the electricity in the place where you will be working, throw them all off. Changing the lamp will take just a few minutes so you do not have to worry about your refrigerator or any other appliances that should be running. Go back into the room and try the switch, if the lamp does not go on, you are good to go with the job.
Any content, trademark’s, or other material that might be found on the Thedatacenters.com website that is not Thedatacenters.com’s property remains the copyright of its respective owner/s. In no way does Thedatacenters.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.