Published at Sunday, June 24th, 2018 - 10:29:11 AM. Lamp. By Darcia Gabrielle.
There is one thing you must know before starting the operation, if you are going to exchange a hanging lamp for a lamp which is in contact with the ceiling you must first calculate the height you want to give it and measure the amount of extra wire you will need plus the length of chain you will add. These have to be on hand before you start your work. On the other hand if you are going to remove a hanging lamp and exchange it for a ceiling-fixed lamp you will not need anything else than what we already have.
This procedure applies to a fixed lamp on the ceiling or on the wall. As always please remember to work slowly and pay attention to what you are doing. Safety should be your main concern. In this case you will need a folding ladder that should go all the way up to the lamp; you must also be able to stand on it without going all the way to the top. Please use a good ladder and make sure it is safe and does not wobble before getting on it. You will need our usual set of tools too, pointed electrical pliers, a screwdriver, electrical tape and a new one, a small wrench.
Any content, trademark’s, or other material that might be found on the Thedatacenters.com website that is not Thedatacenters.com’s property remains the copyright of its respective owner/s. In no way does Thedatacenters.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.