Published at Sunday, June 24th, 2018 - 10:31:18 AM. Lamp. By Yolonda Veronique.
You may need someone to help you with this work for a few minutes, all they have to do is hand you the lamp once you are on the ladder. Also they will take the old lamp once you remove it. If they are not too heavy or uncomfortable you may do everything yourself but safety indicates that a little help will make things easier. It is not necessary for you to cut the wires to release the old lamp, it is easier just to take the electrical tape off from them and separate them using the pliers.
Place the ladder below the old lamp but slightly to the side so you can comfortably and safely reach its base on the ceiling. The old lamp is held in place by a nut just below its base, using the wrench loosen it and gently stretch the electric wires above. There should be two wires connected to the lamp and sometimes, not always, a ground wire sticking from the side of the base. Remember the ground screw is green most lamps have one even if it is not connected.
Recent Post
Category
Monthly Archives
Static Pages
About ⋅ Contact ⋅ Privacy Policy ⋅ Terms of Service ⋅ Copyright/IP Policy
Any content, trademark’s, or other material that might be found on the Thedatacenters.com website that is not Thedatacenters.com’s property remains the copyright of its respective owner/s. In no way does Thedatacenters.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.