Published at Friday, June 22nd, 2018 - 09:25:47 AM. Lamp. By Tallis Carressa.
There is one thing you must know before starting the operation, if you are going to exchange a hanging lamp for a lamp which is in contact with the ceiling you must first calculate the height you want to give it and measure the amount of extra wire you will need plus the length of chain you will add. These have to be on hand before you start your work. On the other hand if you are going to remove a hanging lamp and exchange it for a ceiling-fixed lamp you will not need anything else than what we already have.
This table lamp has a brass base in a step up design beginning with the largest step on the bottom. The carved feet really set off this lamp very well, and the glass stem gives the lamp a stylish yet open feel. The white fabric shade is 16", and it has a 3-way rotating light switch so that you can set your desired lighting level. The maximum bulb you should use is a 100-watt bulb. There is just a slight bit of assembly required for this Waterford Crystal lamp that will take all of 5 minutes.
Any content, trademark’s, or other material that might be found on the Thedatacenters.com website that is not Thedatacenters.com’s property remains the copyright of its respective owner/s. In no way does Thedatacenters.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.