Published at Sunday, June 24th, 2018 - 10:33:41 AM. Lamp. By Tallis Carressa.
Place the ladder below the old lamp but slightly to the side so you can comfortably and safely reach its base on the ceiling. The old lamp is held in place by a nut just below its base, using the wrench loosen it and gently stretch the electric wires above. There should be two wires connected to the lamp and sometimes, not always, a ground wire sticking from the side of the base. Remember the ground screw is green most lamps have one even if it is not connected.
This table lamp has a brass base in a step up design beginning with the largest step on the bottom. The carved feet really set off this lamp very well, and the glass stem gives the lamp a stylish yet open feel. The white fabric shade is 16", and it has a 3-way rotating light switch so that you can set your desired lighting level. The maximum bulb you should use is a 100-watt bulb. There is just a slight bit of assembly required for this Waterford Crystal lamp that will take all of 5 minutes.
Any content, trademark’s, or other material that might be found on the Thedatacenters.com website that is not Thedatacenters.com’s property remains the copyright of its respective owner/s. In no way does Thedatacenters.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.